![]() Including them will improve your tracking. As a rule of thumb, a fin placed toward the front of the box will provide more turning maneuverability and a fin placed at the back of the box will provide improved tracking and a straighter line. You can move the fin back or forward in the fin box as you would like. Tighten the set screws until the fin is secure. Line the side fins up so their point is aiming at the back of the board and insert them into the now open slots.ģ. With a hex key or an appropriate Allen wrench, loosen the set screws until they no longer impede putting the side fins into their slots.Ģ. For more on fin placement, go to the section below.ġ. If the fin box allows for movement, p ull the fin to where you would like it to sit in the fin box. The immediate worry that many have about a fin that snaps into place via pressure is that it could come back out the beauty of the universal fin is that it requires pressure from the direction of the bottom of the board and toward the nose, which is not the directionality that cruising through the water will apply.ģ. Below, you see that if the fin is at the front of box on a Paddle North Board, you can easily slip the roller into the slot in the middle of the fin box. Push the end with the roller until it snaps into the fin box channel. Note that the point of the fin should be aimed to the back of the board.Ģ. Line the metal dowel up with the hole in the center of the fin box and place it into the track. Insert the screw and tighten it up until it is snug, but do not over-tighten.ġ. Set the end of the fin with the screw hole into the fin box and line the plate up with the screw hole. Note that the fin should curve with the point toward the back of the board.Ĥ. Line the metal dowel up with the space in the middle of the fin box and set it into the track. Move the plate to the front of the fin box (toward the nose of the board)ģ. Another option is to set the plate without the screw into the space and move it around using the tip of a Phillips screwdriver.Ģ. While the screw is sticking up, you should be able to move the plate where you need it. With the plate loosely secured on the end of the screw, set it into the space in the middle of the box. Pictured below are the screw and plate (left) and quick-release (right) setups.ġ. First, identify what type of fin setup you have. Installing the fin on your paddle board, regardless of type, is a simple process. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |